Jump to content

Home

Sound help with XW and TIE CD 95


Stryker412

Recommended Posts

The first thing you should do is run dxdiag (a Windows command you can enter in Start>Run) and see if your sound devices are being detected (not sure which tabs you need to check, but they're Sound 1 and Sound 2 in Windows Vista). Another thing you probably need to make sure of is if you're running Service Pack 3 (you can check by right-clicking Computer on your desktop and choosing Properties).

Link to comment
Share on other sites

The first thing you should do is run dxdiag (a Windows command you can enter in Start>Run) and see if your sound devices are being detected (not sure which tabs you need to check, but they're Sound 1 and Sound 2 in Windows Vista). Another thing you probably need to make sure of is if you're running Service Pack 3 (you can check by right-clicking Computer on your desktop and choosing Properties).

 

I can get sound from within Windows fine. I'll check my dxdiag when u get home. I also did upgrade Win 2000 to SP4.

Link to comment
Share on other sites

Here is my DirectX info for my audio.

 

-------------

Sound Devices

-------------

Description: SB Live! Audio [10E0]

Device ID: PCI\VEN_1102&DEV_0002&SUBSYS_80311102&REV_07

Manufacturer ID: 1

Product ID: 100

Type: WDM

Driver Name: ctaud2k.sys

Driver Version: 5.12.01.0252 (English)

Driver Attributes: Final Retail

Driver Signed: Yes

Date and Size: 7/19/2002 10:47:52, 837548 bytes

Other Files:

Driver Provider: Creative

HW Accel Level: Full

Registry: OK

Sound Test Result: All tests were successful.

 

Only thing I can think of is that the sound card is on IRQ 9.

 

th_audio-bmp.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...