Jump to content

Home

Bandwidth


Night4554

Recommended Posts

Use this as a guide. Say you have a 384kps connection. The math is :

 

number of players x maxrate = bandwidth needed

 

So here is an example:

 

8x4000=32000 (320kps)

 

So you could run 8 players. If you set it to 9

 

9x4000=36000 (360kps)

 

It might work but in high traffic you may get too many slowdowns.

For a 20 person server you would need 800kps for a maxrate of 4000. Hope this helps.

Link to comment
Share on other sites

Math is off... 8bits (b) to a byte (B). or 8b=1B

 

8x4000=32000bytes (32KBps) or (256kbps)

9x4000=36000bytes (36KBps) or (288kbps)

 

If you wanted a 20 person game @ 4000bytes/sec

20x4000=80000bytes (80KBps) or (640kbps)

 

Sorry.. couldn't let this slip by... I'm a network engineer by trade.

 

BTW, I have no idea what the quality of 4KB is like versus 3 or 5 or higher. My server's set at 5KB. If I can get away with 4KB and not get any lag or high pings, I can make my limits higher. Right now (after TCP/IP overhead and such) I can sustain 52KBps (416kbps)

 

Originally posted by Sith Maximus

Use this as a guide. Say you have a 384kps connection. The math is :

 

number of players x maxrate = bandwidth needed

 

So here is an example:

 

8x4000=32000 (320kps)

 

So you could run 8 players. If you set it to 9

 

9x4000=36000 (360kps)

 

It might work but in high traffic you may get too many slowdowns.

For a 20 person server you would need 800kps for a maxrate of 4000. Hope this helps.

Link to comment
Share on other sites

a sv_maxrate of 5000 is kinda piss poor for a 10+ client server.

 

7000 for a 16 client server seems to work well, but in my experience going lower tends to start causing unneccessary lag.

 

 

Furthermore after a server hits about 18 players, the q3 engine itself starts to buckle a little... even at a maxrate of 10000

Link to comment
Share on other sites

  • 3 weeks later...
Originally posted by Viper

ok i have broadband 1 mb connection thats 1024kb down and 256 kb up i want to run a dedicated server for 10 people including myself what maxrate would i need to use ???????

 

The upload is most important in this case. You are able to upload 32k/sec with your connection. You'd be fine with a 10 person server.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...