davedelay Posted April 8, 2002 Share Posted April 8, 2002 I finally got JK2 to run! I removed my Soundblaster 16 card that had the Vibra chip and got it run without sound. So I tried another sound card (Yahama) and it ran once. Then after trying it again I found that starting JK2 in safe mode I could get a blue screen that made reference to VxD Sound errors. I do have DX 8.1 loaded and the JK2 system analysist says everything is fine. I havn't done a DX info on it however. My profile is: mobo FIC 503+ 196 Mb ram AMD K6-2 at 550 Radeon 7200 Link to comment Share on other sites More sharing options...
batai37 Posted April 14, 2002 Share Posted April 14, 2002 Originally posted by davedelay I finally got JK2 to run! I removed my Soundblaster 16 card that had the Vibra chip and got it run without sound. So I tried another sound card (Yahama) and it ran once. Then after trying it again I found that starting JK2 in safe mode I could get a blue screen that made reference to VxD Sound errors. I do have DX 8.1 loaded and the JK2 system analysist says everything is fine. I havn't done a DX info on it however. My profile is: mobo FIC 503+ 196 Mb ram AMD K6-2 at 550 Radeon 7200 What OS are you running? Link to comment Share on other sites More sharing options...
Maddes Posted April 15, 2002 Share Posted April 15, 2002 Maybe JK2 uses newer sound functions which are not supported by your drivers. I assume that your drivers are too old, but I also assume that Creative Labs isn't supporting the SB16 with new drivers anymore. Maddes Link to comment Share on other sites More sharing options...
littletotem Posted April 15, 2002 Share Posted April 15, 2002 1st check your drivers make make sure there upto date. IF they are and your current sound card is a few years old , then sure get a new one. Oh, forget , SB16 .. YES replace it!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.