HellFyre69 Posted February 19, 2004 Share Posted February 19, 2004 I previously owned a Geforce4 4200, and I had my brightness set up about in the middle. Now i Recently bought a Radeon 9700 Pro, and it seems that my brightness goes back to normal, everytime i start up the game. pls is getting annoying, Help! BTW: Im using the latest video card drivers, and settings @ 1024* 800 32 bit Everything on hightest, Trilianer. Link to comment Share on other sites More sharing options...
lukeskywalker1 Posted February 19, 2004 Share Posted February 19, 2004 hmmm... you might have to set it yourself, through the console. try these commands in game: r_intensity "1.8" - This command increases the brightness of texture colors. With a low r_OverBrightBits, you may have to boost this to around 2 (default is 1). Keep experimenting until you find a brightness level you are comfortable with. r_gamma "2" - This is the master command that adjusts the brightness level of everything in the entire game. All splash screens and menus, along with the actual game play is affected. The default value is 1, but you should usually make this higher, depending on the brightness of your monitor (and to compensate for a low r_OverBrightBits setting). Try 1.4, 1.6, 1.8, 2 etc until you find a good setting. When setting r_OverBrightBits to 0, you'll have to juggle around between r_intensity and r_gamma until you find something you are comfortable with. thats a quote from this: Team Image Config Guide Link to comment Share on other sites More sharing options...
HellFyre69 Posted February 19, 2004 Author Share Posted February 19, 2004 Well i tried that, and i did not work. Everytime i quit JKA, and run it again, it goes the brightness/gamma goes back to default. However if i move the bar a little bit, it turns back into normal. =\ weird... Link to comment Share on other sites More sharing options...
Crow_Nest Posted February 19, 2004 Share Posted February 19, 2004 Try adding that command to your config file in base. Btw, thx for that link Link to comment Share on other sites More sharing options...
HellFyre69 Posted February 19, 2004 Author Share Posted February 19, 2004 Is already set up on my config. I Think this is a problem related to my videocard or something... Anyone has the same problem? This only happen on JKA. Link to comment Share on other sites More sharing options...
Crow_Nest Posted February 20, 2004 Share Posted February 20, 2004 Do you have the patch installed? Link to comment Share on other sites More sharing options...
HellFyre69 Posted February 22, 2004 Author Share Posted February 22, 2004 yes, i have the last patch 1.01 Link to comment Share on other sites More sharing options...
Crow_Nest Posted February 22, 2004 Share Posted February 22, 2004 Do you have the latest ATI drivers? Cat4.1, you can get it from the ATI site. Link to comment Share on other sites More sharing options...
HellFyre69 Posted February 25, 2004 Author Share Posted February 25, 2004 Yes, I have the latest ones, and it is actually.. Cat4.2 Link to comment Share on other sites More sharing options...
Crow_Nest Posted February 25, 2004 Share Posted February 25, 2004 Originally posted by HellFyre69 Yes, I have the latest ones, and it is actually.. Cat4.2 Then try the old drivers again, like cat3.9 or 3.8 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.