Jump to content

Home

I'm a MORON and Need help


Reklawyad

Recommended Posts

OK, this is my first attempt and actually launching a Dedicated Server over the internet, I've done it before over LAN without problems, but I seem to be having problems with the Routing aspect of it.

 

When i startup the server, it goes to the Winsock Initialized, then goes to open the Port, but then gives me a WARNING: UDP_OpenSocket: bind: WSAEADDRNOTAVAIL

 

I would assume this means the port is not available, but I have configured my router to use the port. I also have the decidated server starting up with +set net_ip xx.xx.xx.xx:ppppp

 

Anyone have any suggestions?

 

I'm using a NetGear RP114 Router to share my RR, and I have followed the intructions to setup the IP Forwarding in the Router.

 

Thanks.

Link to comment
Share on other sites

Did you remove it from the jk2mpconfig.cfg as well? Are you getting an identical error. Generally, you get that error when you use an external ip address that your box has no clue about. In other words, you're box may be 192.168.0.2 and your external ip (outside the router) is 216.62.126.78. If you set net_ip 216.62.126.78, then the box tries to open a port on that ip and can't. Make sure a duplicate entry was not in the jk2mpconfig.cfg.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...