xxhellspawnxx Posted October 28, 2012 Share Posted October 28, 2012 i am trying to install tomb of azgath 2.0 and i keep getting this error • Error: Unhandled exception: Access violation at address 00000000. Read of address 00000000 (0) i looked thru the forums for help found it it might b a file conflict so i did what was said by looking for identical files i found only that the loadscreens.2da was in all since they only change load screens for differrent planets or add new ones i dont think this is the cause, on further look thru the install rtf i saw that the loadscreens.2da was added without problem. the mods i am using for kotor2 are listed in the order i installed them 1.1b offical patch tslrcm 1.8 droid planet m4-78 jedi temple 2.0 and patches tomb of azgath now i checked thru a saved game and the new characters are on onderon and the one that starts off the quest talks to me gives the quest but he quest box shows up blank and the npc in the western square keeps saying he doesnt kno me nor care to. i would like to know how to fix this problem. thanks. Link to comment Share on other sites More sharing options...
xxhellspawnxx Posted October 29, 2012 Author Share Posted October 29, 2012 ok did a complete uninstall and reinstall of the game i installs the offical patch then tslrcm then tried tomb of azgath and i ended up with this error this time • Error: Unhandled exception: Access violation at address 000000E7. Read of address 000000E7 (0) would really like to fix this problem if possiable Link to comment Share on other sites More sharing options...
kyrie Posted October 29, 2012 Share Posted October 29, 2012 m4-78 doesn't currently work with tslrcm 1.8. m4-78EP will be out sometime soon, not sure exactly when, it will be compatible with and require tslrcm 1.8.1. you need to remove read only from the properties for the kotor2 program folder. check out http://www.deadlystream.com for more info on m4-78EP and tslrcm 1.8.1 Link to comment Share on other sites More sharing options...
xxhellspawnxx Posted October 31, 2012 Author Share Posted October 31, 2012 any ideas on how i can make the mods compatiable to each other because jedi temple and tslrcm work great together i would like tomb of azgath to work also but am at a loss as to what needs to be fixed to make it work Link to comment Share on other sites More sharing options...
kyrie Posted November 1, 2012 Share Posted November 1, 2012 any ideas on how i can make the mods compatiable to each other because jedi temple and tslrcm work great together i would like tomb of azgath to work also but am at a loss as to what needs to be fixed to make it work Did you make sure that the read only property was unchecked and hit apply for the properties for your kotor2 install folder? It makes changes to .mod files in the modules folder that will cause an error. Link to comment Share on other sites More sharing options...
xxhellspawnxx Posted November 1, 2012 Author Share Posted November 1, 2012 yes Link to comment Share on other sites More sharing options...
kyrie Posted November 1, 2012 Share Posted November 1, 2012 hmmm not sure, only time I got that error was when I forgot to do it. Link to comment Share on other sites More sharing options...
Darth InSidious Posted November 3, 2012 Share Posted November 3, 2012 Have you tried redownloading the mod? Link to comment Share on other sites More sharing options...
Sith Holocron Posted November 3, 2012 Share Posted November 3, 2012 I recall reading something about this at Deadly Stream - at least in regards to InSidious' Tomb of Azgath N'dul mod. Install TSLRCM Delete file global.jrl in Override folder Install MOD Tomb of Azgath N'dul (V 2.0) ( http://knightsoftheoldrepublic.filefront.com/file/Tomb_of_Azgath_NDul;86662x#1480590 ) Install patch 2.2 (NOT patch 2.1) ( http://knightsoftheoldrepublic.filefront.com/file/;113947 ) Download and run Dstoney64's patch ( http://h1.ripway.com/dstoney/TSLRCM_Tomb_patch.rar ) Can anyone confirm if this works with the most current TSLRCM? Link to comment Share on other sites More sharing options...
kyrie Posted November 3, 2012 Share Posted November 3, 2012 I got it to install. I know I made some changes to the changes.ini file to include changes to the global.jrl file, I only got 1 error when installing and that was because of a typo in the .ini a file marked as 42 instead of 49 which I have since fixed. I know that someone over on deadlystream is having issues too but it was the .lip files that wouldn't install for them. With INSidious' permission I could put up the new changes.ini file that I created. Here is my installlog results: • Installation started 7/27/2012 10:58:10 PM... • Install path set to C:\LucasArts\SWKotOR2\. • Loading StrRef token table... • 2 StrRef tokens found and indexed. • Appending strings to TLK file "C:\LucasArts\SWKotOR2\dialog.tlk" • Appending new entry to dialog.tlk, new StrRef is 136375 • Appending new entry to dialog.tlk, new StrRef is 136376 • dialog.tlk file updated with 2 new entries. • Installing unmodified files... • Copying file somethingtome.tga to the Override folder... • Copying file w_Stunbaton_241.mdx to the Override folder... • Copying file w_Stunbaton_241.mdl to the Override folder... • Copying file iw_Stunbaton_241.tga to the Override folder... • Copying file poozle.tga to the Override folder... • Copying file poozle.txi to the Override folder... • Copying file iw_SonicPstl_241.tga to the Override folder... • Copying file di_scorch.ncs to the Override folder... • Copying file w_SonicPstl_241.mdx to the Override folder... • Copying file w_SonicPstl_241.mdl to the Override folder... • Copying file di_sonicsdriver1.uti to the Override folder... • Copying file 712_wal08.tga to the Override folder... • Copying file 712kor.lyt to the Override folder... • Copying file 712kor.vis to the Override folder... • Copying file 712kora.wok to the Override folder... • Copying file 712korb.wok to the Override folder... • Copying file 712korc.wok to the Override folder... • Copying file 712kord.wok to the Override folder... • Copying file 712kore.wok to the Override folder... • Copying file 712korf.wok to the Override folder... • Copying file 712korg.wok to the Override folder... • Copying file 712korh.wok to the Override folder... • Copying file 712kori.wok to the Override folder... • Copying file 712korj.wok to the Override folder... • Copying file 712koru_lm1.tga to the Override folder... • Copying file plc_sithsar3.mdx to the Override folder... • Copying file PLC_Sar3.tga to the Override folder... • Copying file plc_sithsar3.pwk to the Override folder... • Copying file plc_sithsar3.mdl to the Override folder... • Copying file pmbj42.tga to the Override folder... • Copying file PFBJ42.tga to the Override folder... • Copying file 712kora.mdx to the Override folder... • Copying file 712korb.mdx to the Override folder... • Copying file 712kore.mdx to the Override folder... • Copying file 712korf.mdx to the Override folder... • Copying file 712korg.mdx to the Override folder... • Copying file 712korh.mdx to the Override folder... • Copying file 712kori.mdx to the Override folder... • Copying file 712korj.mdx to the Override folder... • Copying file 712kore.mdl to the Override folder... • Copying file 712korb.mdl to the Override folder... • Copying file 712kora.mdl to the Override folder... • Copying file 712korc.mdx to the Override folder... • Copying file 712korc.mdl to the Override folder... • Copying file 712kord.mdx to the Override folder... • Copying file 712kord.mdl to the Override folder... • Copying file 712korf.mdl to the Override folder... • Copying file 712korg.mdl to the Override folder... • Copying file 712korh.mdl to the Override folder... • Copying file 712kori.mdl to the Override folder... • Copying file 712korj.mdl to the Override folder... • Copying file 712kora_lm0.tga to the Override folder... • Copying file 712kora_lm1.tga to the Override folder... • Copying file 712kora_lm10.tga to the Override folder... • Copying file 712kora_lm2.tga to the Override folder... • Copying file 712kora_lm3.tga to the Override folder... • Copying file 712kora_lm4.tga to the Override folder... • Copying file 712kora_lm5.tga to the Override folder... • Copying file 712kora_lm6.tga to the Override folder... • Copying file 712kora_lm7.tga to the Override folder... • Copying file 712kora_lm8.tga to the Override folder... • Copying file 712kora_lm9.tga to the Override folder... • Copying file 712korb_lm0.tga to the Override folder... • Copying file 712korb_lm1.tga to the Override folder... • Copying file 712korb_lm2.tga to the Override folder... • Copying file 712korb_lm3.tga to the Override folder... • Copying file 712korb_lm4.tga to the Override folder... • Copying file 712korc_lm0.tga to the Override folder... • Copying file 712korc_lm1.tga to the Override folder... • Copying file 712kore_lm0.tga to the Override folder... • Copying file 712kord_lm0.tga to the Override folder... • Copying file 712korf_lm0.tga to the Override folder... • Copying file 712korg_lm0.tga to the Override folder... • Copying file 712korg_lm1.tga to the Override folder... • Copying file 712korh_lm0.tga to the Override folder... • Copying file 712korh_lm1.tga to the Override folder... • Copying file 712korh_lm2.tga to the Override folder... • Copying file 712kori_lm0.tga to the Override folder... • Copying file 712kori_lm1.tga to the Override folder... • Copying file 712korj_lm0.tga to the Override folder... • Copying file 712korj_lm1.tga to the Override folder... • Copying file PMBJ43.tga to the Override folder... • Copying file PFBJ43.tga to the Override folder... • Copying file PFBI43.tga to the Override folder... • Copying file PMBI43.tga to the Override folder... • Copying file di_robe_01.uti to the Override folder... • Copying file di_robe_03.uti to the Override folder... • Copying file ia_jedirobe_043.tga to the Override folder... • Copying file ia_jedirobe_042.tga to the Override folder... • Copying file ia_revan_042.tga to the Override folder... • Copying file ia_revan_043.tga to the Override folder... • Copying file PMBH42.txi to the Override folder... • Copying file PMBH42.tga to the Override folder... • Copying file di_heavy_1.uti to the Override folder... • Warning: Unable to copy file "ia_class8_042.tga", file does not exist! <--- should be ia_class8_049.tga • Copying file ia_class9_042.tga to the Override folder... • Copying file PFBH42.txi to the Override folder... • Copying file PFBH42.tga to the Override folder... • Copying file PFBI45.tga to the Override folder... • Copying file PMBI45.tga to the Override folder... • Copying file 713kor.vis to the Override folder... • Copying file 713kor01.wok to the Override folder... • Copying file 713kor.lyt to the Override folder... • Copying file 713kor01.mdx to the Override folder... • Copying file 713kor01.mdl to the Override folder... • Copying file 713kor01_lm2.tga to the Override folder... • Copying file 713kor01_lm1.tga to the Override folder... • Copying file 713kor01_lm0.tga to the Override folder... • Copying file 0713kor01_lm0.tga to the Override folder... • Copying file 0713kor01_lm2.tga to the Override folder... • Copying file 0713kor01_lm1.tga to the Override folder... • Copying file PFBI46.tga to the Override folder... • Copying file PMBI46.tga to the Override folder... • Copying file PFBN42.tga to the Override folder... • Copying file PFBI47.tga to the Override folder... • Copying file PMBI47.tga to the Override folder... • Copying file PFBI48.tga to the Override folder... • Copying file PMBI48.tga to the Override folder... • Copying file plc_di_ndbox.mdx to the Override folder... • Copying file plc_di_ndbox.pwk to the Override folder... • Copying file PLC_DI_NDBox.tga to the Override folder... • Copying file iw_SbrCrstl_099.tga to the Override folder... • Copying file iw_SbrCrstl_098.tga to the Override folder... • Copying file plc_di_ndbox.mdl to the Override folder... • Copying file ii_FrArmBnds_099.tga to the Override folder... • Copying file ii_Gauntlet_099.tga to the Override folder... • Copying file pfbj44.txi to the Override folder... • Copying file pmbj44.txi to the Override folder... • Copying file plc_infoter2.pwk to the Override folder... • Copying file PLC_Compandt.tga to the Override folder... • Copying file ii_Belt_099.tga to the Override folder... • Copying file ii_Implant3_099.tga to the Override folder... • Copying file PFBI99.tga to the Override folder... • Copying file PMBI99.tga to the Override folder... • Copying file ia_JediRobe_099.tga to the Override folder... • Copying file plc_infoter2.mdx to the Override folder... • Copying file plc_infoter2.mdl to the Override folder... • Copying file PMBC42.tga to the Override folder... • Copying file di_light_01.uti to the Override folder... • Copying file plc_di_ndbox.txi to the Override folder... • Copying file PFBC42.tga to the Override folder... • Copying file ia_Class4_042.tga to the Override folder... • Copying file 713korcam.mdl to the Override folder... • Copying file 713korcam.mdx to the Override folder... • Copying file di_gloves_11.uti to the Override folder... • Copying file di_belt_16.uti to the Override folder... • Copying file di_robe_11.uti to the Override folder... • Copying file pfbj44.tga to the Override folder... • Copying file pmbj44.tga to the Override folder... • Copying file di_robe_15.uti to the Override folder... • Copying file ia_jedirobe_045.tga to the Override folder... • Copying file ia_jedirobe_047.tga to the Override folder... • Copying file ia_jedirobe_046.tga to the Override folder... • Copying file ia_jedirobe_048.tga to the Override folder... • Copying file ia_mstrrobe_042.tga to the Override folder... • Copying file di_robe_12.uti to the Override folder... • Copying file di_robe_13.uti to the Override folder... • Copying file di_robe_14.uti to the Override folder... • Copying file di_robe_02.uti to the Override folder... • Copying file di_robe_04.uti to the Override folder... • Copying file ia_revan_044.tga to the Override folder... • Copying file lbl_map712KOR.tga to the Override folder... • Copying file PMBI42.tga to the Override folder... • Copying file PFBI42.tga to the Override folder... • Copying file di_band_02.uti to the Override folder... • Copying file di_band_03.uti to the Override folder... • Copying file di_band_04.uti to the Override folder... • Copying file di_band_01.uti to the Override folder... • Copying file di_band_05.uti to the Override folder... • Copying file di_band_06.uti to the Override folder... • Copying file di_band_07.uti to the Override folder... • Copying file di_band_08.uti to the Override folder... • Copying file di_band_09.uti to the Override folder... • Copying file di_band_10.uti to the Override folder... • Copying file di_band_11.uti to the Override folder... • Copying file di_band_12.uti to the Override folder... • Copying file di_band_13.uti to the Override folder... • Copying file di_band_14.uti to the Override folder... • Copying file di_band_15.uti to the Override folder... • Copying file di_belt_01.uti to the Override folder... • Copying file di_belt_02.uti to the Override folder... • Copying file di_belt_03.uti to the Override folder... • Copying file di_belt_04.uti to the Override folder... • Copying file di_belt_06.uti to the Override folder... • Copying file di_belt_07.uti to the Override folder... • Copying file di_belt_08.uti to the Override folder... • Copying file di_belt_09.uti to the Override folder... • Copying file di_belt_10.uti to the Override folder... • Copying file di_belt_11.uti to the Override folder... • Copying file di_belt_12.uti to the Override folder... • Copying file di_belt_13.uti to the Override folder... • Copying file di_belt_14.uti to the Override folder... • Copying file di_belt_15.uti to the Override folder... • Copying file di_crys_00.uti to the Override folder... • Copying file di_crys_01.uti to the Override folder... • Copying file di_crys_02.uti to the Override folder... • Copying file di_crys_03.uti to the Override folder... • Copying file di_crys_04.uti to the Override folder... • Copying file di_crys_05.uti to the Override folder... • Copying file di_crys_06.uti to the Override folder... • Copying file di_crys_07.uti to the Override folder... • Copying file di_crys_08.uti to the Override folder... • Copying file di_crys_09.uti to the Override folder... • Copying file di_crys_10.uti to the Override folder... • Copying file di_crys_11.uti to the Override folder... • Copying file di_crys_12.uti to the Override folder... • Copying file di_crys_13.uti to the Override folder... • Copying file di_crys_15.uti to the Override folder... • Copying file di_crys_14.uti to the Override folder... • Copying file di_crys_16.uti to the Override folder... • Copying file di_crys_17.uti to the Override folder... • Copying file di_crys_18.uti to the Override folder... • Copying file di_crys_19.uti to the Override folder... • Copying file di_gloves_01.uti to the Override folder... • Copying file di_gloves_02.uti to the Override folder... • Copying file di_gloves_03.uti to the Override folder... • Copying file di_gloves_04.uti to the Override folder... • Copying file di_gloves_05.uti to the Override folder... • Copying file di_gloves_06.uti to the Override folder... • Copying file di_gloves_08.uti to the Override folder... • Copying file di_gloves_09.uti to the Override folder... • Copying file di_gloves_10.uti to the Override folder... • Copying file di_imp_01.uti to the Override folder... • Copying file di_imp_02.uti to the Override folder... • Copying file di_imp_03.uti to the Override folder... • Copying file di_imp_04.uti to the Override folder... • Copying file di_imp_05.uti to the Override folder... • Copying file di_robe_05.uti to the Override folder... • Copying file di_robe_06.uti to the Override folder... • Copying file di_robe_07.uti to the Override folder... • Copying file di_robe_08.uti to the Override folder... • Copying file di_robe_09.uti to the Override folder... • Copying file di_bottle1.uti to the Override folder... • Copying file di_robe_10.uti to the Override folder... • Copying file bkls.tga to the Override folder... • Copying file bkls.txi to the Override folder... • Copying file w_lsabredird01.txi to the Override folder... • Copying file di_lghtsbr_45.uti to the Override folder... • Copying file 713_tap.tga to the Override folder... • Copying file 713_gly01.tga to the Override folder... • Copying file 712_flr02.tga to the Override folder... • Copying file 712_rock5.tga to the Override folder... • Copying file 712_rocks.tga to the Override folder... • Copying file 713_deco.tga to the Override folder... • Copying file 713_fl04.tga to the Override folder... • Copying file 713_tr04.tga to the Override folder... • Copying file 713_tr05.tga to the Override folder... • Copying file 713_wl07.tga to the Override folder... • Copying file 713_wl08.tga to the Override folder... • Copying file 713_wl09.tga to the Override folder... • Copying file 713_wl10b.tga to the Override folder... • Copying file 712_fr02.tga to the Override folder... • Copying file 71C_wal07a.tga to the Override folder... • Copying file 712_wal07a.tga to the Override folder... • Copying file load_712kor.tga to the Override folder... • Copying file load_713kor.tga to the Override folder... • Copying file hath.tga to the Override folder... • Copying file hath.txi to the Override folder... • Copying file w_lsabredird02.txi to the Override folder... • Copying file w_shortsbr_046.mdx to the Override folder... • Copying file w_lghtsbr_045.mdx to the Override folder... • Copying file w_lghtsbr_045.mdl to the Override folder... • Copying file di_crys_20.uti to the Override folder... • Copying file di_crys_21.uti to the Override folder... • Copying file iw_SbrCrstl_046.tga to the Override folder... • Copying file iw_SbrCrstl_045.tga to the Override folder... • Copying file w_shortsbr_046.mdl to the Override folder... • Copying file iw_lghtsbr_045.tga to the Override folder... • Copying file iw_shortsbr_046.tga to the Override folder... • Copying file hotep.tga to the Override folder... • Copying file hotep.txi to the Override folder... • Copying file di_dagger_1.uti to the Override folder... • Copying file iw_stunbaton_242.tga to the Override folder... • Copying file onchi.tga to the Override folder... • Copying file onchii.tga to the Override folder... • Copying file w_BlstrPstl_042.mdl to the Override folder... • Copying file w_BlstrPstl_042.mdx to the Override folder... • Copying file di_blstr_01.uti to the Override folder... • Copying file onchi.txi to the Override folder... • Copying file onchii.txi to the Override folder... • Copying file iw_BlstrPstl_042.tga to the Override folder... • Copying file di_kemarelim.utc to the Override folder... • Copying file di_gluutyr.utc to the Override folder... • Copying file di_gloves_07.uti to the Override folder... • Copying file di_belt_05.uti to the Override folder... • Copying file th_lead.dlg to the Override folder... • Copying file taepalae.dlg to the Override folder... • Copying file w_Stunbaton_242.mdl to the Override folder... • Copying file w_Stunbaton_242.mdx to the Override folder... • Copying file di_ke_visa.uti to the Override folder... • Copying file di_kemarelim1.dlg to the Override folder... • Copying file w_lsabredird01.tga to the Override folder... • Copying file di_shortsbr_46.uti to the Override folder... • Copying file w_lsabredird02.tga to the Override folder... • Copying file kreia_kr.dlg to the Override folder... • Copying file di_skyrus1.dlg to the Override folder... • Copying file di_attack.ncs to the Override folder... • Copying file di_chk_ke1.ncs to the Override folder... • Copying file di_chk_ke2.ncs to the Override folder... • Copying file di_chk_ke3.ncs to the Override folder... • Copying file di_chk_ke.ncs to the Override folder... • Copying file di_feria1.ncs to the Override folder... • Copying file di_ke_1.ncs to the Override folder... • Copying file di_ke_2.ncs to the Override folder... • Copying file di_ke_3.ncs to the Override folder... • Copying file di_ke_4.ncs to the Override folder... • Copying file di_ke_5.ncs to the Override folder... • Copying file di_ke_6.ncs to the Override folder... • Copying file di_ke_7.ncs to the Override folder... • Copying file di_sk_death1.ncs to the Override folder... • Copying file di_spn_gt.ncs to the Override folder... • Copying file di_spn_ke.ncs to the Override folder... • Copying file di_spn_sk.ncs to the Override folder... • Copying file di_from712.utw to the Override folder... • Copying file di_st_tmb.ncs to the Override folder... • Copying file di_tmbspn.ncs to the Override folder... • Copying file di_to_712.ncs to the Override folder... • Copying file di_skyrus.utc to the Override folder... • Copying file di_te.dlg to the Override folder... • Copying file di_scorch.tga to the Override folder... • Copying file di_gluutyr1.dlg to the Override folder... • Copying file cs_tal_1.dlg to the Override folder... • Copying file di_heavy_2.uti to the Override folder... • Copying file PMBG49.txi to the Override folder... • Copying file PMBG49.tga to the Override folder... • Copying file PFBG49.txi to the Override folder... • Copying file PFBG49.tga to the Override folder... • Copying file 713KOR.mod to the Modules folder... • Copying file 712KOR.mod to the Modules folder... • Adding file avo_twilmcmntm1.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmcmntm1.lip" found in override folder. • Adding file avo_twilmcmntm3.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmcmntm3.lip" found in override folder. • Adding file avo_twilmcmnts2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmcmnts2.lip" found in override folder. • Adding file avo_twilmgrets1.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmgrets1.lip" found in override folder. • Adding file avo_twilmquess2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmquess2.lip" found in override folder. • Adding file avo_twilmquess3.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmquess3.lip" found in override folder. • Adding file avo_twilmcmntl1.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmcmntl1.lip" found in override folder. • Adding file avo_twilmcmntl2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmcmntl2.lip" found in override folder. • Adding file avo_twilmcmntl3.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmcmntl3.lip" found in override folder. • Adding file avo_twilmhapys1.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmhapys1.lip" found in override folder. • Adding file avo_twilmhapyl3.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmhapyl3.lip" found in override folder. • Adding file avo_twilmangl2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmangl2.lip" found in override folder. • Adding file avo_twilmsadm2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmsadm2.lip" found in override folder. • Adding file avo_twilmsadm3.lip to the lips\localization.mod archive... • Override check: No file with name "avo_twilmsadm3.lip" found in override folder. • Adding file avo_devocmntm2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_devocmntm2.lip" found in override folder. • Adding file avo_devoquesm1.lip to the lips\localization.mod archive... • Override check: No file with name "avo_devoquesm1.lip" found in override folder. • Adding file avo_devoquesl2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_devoquesl2.lip" found in override folder. • Adding file avo_devoangs3.lip to the lips\localization.mod archive... • Override check: No file with name "avo_devoangs3.lip" found in override folder. • Adding file avo_devoangm2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_devoangm2.lip" found in override folder. • Adding file avo_devoangm3.lip to the lips\localization.mod archive... • Override check: No file with name "avo_devoangm3.lip" found in override folder. • Adding file avo_devocmntm1.lip to the lips\localization.mod archive... • Override check: No file with name "avo_devocmntm1.lip" found in override folder. • Adding file avo_devocmntm3.lip to the lips\localization.mod archive... • Override check: No file with name "avo_devocmntm3.lip" found in override folder. • Adding file avo_rodimsadm1.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimsadm1.lip" found in override folder. • Adding file avo_rodimsadl3.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimsadl3.lip" found in override folder. • Adding file avo_rodimangm1.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimangm1.lip" found in override folder. • Adding file avo_rodimangm2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimangm2.lip" found in override folder. • Adding file avo_rodimangm3.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimangm3.lip" found in override folder. • Adding file avo_rodimhapym1.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimhapym1.lip" found in override folder. • Adding file avo_rodimhapym2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimhapym2.lip" found in override folder. • Adding file avo_rodimhapym3.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimhapym3.lip" found in override folder. • Adding file avo_rodimcmnts2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimcmnts2.lip" found in override folder. • Adding file avo_rodimangs1.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimangs1.lip" found in override folder. • Adding file avo_rodimangs2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimangs2.lip" found in override folder. • Adding file avo_rodimangs3.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimangs3.lip" found in override folder. • Adding file avo_rodimquess2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimquess2.lip" found in override folder. • Adding file avo_rodimhapys2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimhapys2.lip" found in override folder. • Adding file avo_rodimhapys3.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimhapys3.lip" found in override folder. • Adding file avo_rodimmockm2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimmockm2.lip" found in override folder. • Adding file avo_rodimscars2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimscars2.lip" found in override folder. • Adding file avo_rodimscarm1.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimscarm1.lip" found in override folder. • Adding file avo_rodimscarm2.lip to the lips\localization.mod archive... • Override check: No file with name "avo_rodimscarm2.lip" found in override folder. • Copying file di_kre1.wav to the StreamVoice folder... • Copying file di_kre2.wav to the StreamVoice folder... • Copying file di_kre3.wav to the StreamVoice folder... • Copying file di_kre4.wav to the StreamVoice folder... • Modifying file "placeables.2da" found in Override folder... • Setting row label to next HIGHEST value 375. • Adding new row (index 375) to 2DA file placeables.2da... • Found a 2DAMEMORY1 token! Storing value "375" from 2da to memory... • Setting row label to next HIGHEST value 376. • Adding new row (index 376) to 2DA file placeables.2da... • Found a 2DAMEMORY2 token! Storing value "376" from 2da to memory... • Setting row label to next HIGHEST value 377. • Adding new row (index 377) to 2DA file placeables.2da... • Found a 2DAMEMORY3 token! Storing value "377" from 2da to memory... • Updated 2DA file C:\LucasArts\SWKotOR2\override\placeables.2da. • Copying file loadscreens.2da to Override folder... • Adding new row (index 87) to 2DA file loadscreens.2da... • Adding new row (index 88) to 2DA file loadscreens.2da... • Updated 2DA file C:\LucasArts\SWKotOR2\override\loadscreens.2da. • Copying file upgrade.2da to Override folder... • Setting row label to next HIGHEST value 369. • Adding new row (index 369) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 370. • Adding new row (index 370) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 371. • Adding new row (index 371) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 372. • Adding new row (index 372) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 373. • Adding new row (index 373) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 374. • Adding new row (index 374) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 375. • Adding new row (index 375) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 376. • Adding new row (index 376) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 377. • Adding new row (index 377) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 378. • Adding new row (index 378) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 379. • Adding new row (index 379) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 380. • Adding new row (index 380) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 381. • Adding new row (index 381) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 382. • Adding new row (index 382) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 383. • Adding new row (index 383) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 384. • Adding new row (index 384) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 385. • Adding new row (index 385) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 386. • Adding new row (index 386) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 387. • Adding new row (index 387) to 2DA file upgrade.2da... • Setting row label to next HIGHEST value 388. • Adding new row (index 388) to 2DA file upgrade.2da... • Updated 2DA file C:\LucasArts\SWKotOR2\override\upgrade.2da. • Modifying file "globalcat.2da" found in Override folder... • Adding new row (index 1064) to 2DA file globalcat.2da... • Setting row label to next HIGHEST value 1065. • Updated 2DA file C:\LucasArts\SWKotOR2\override\globalcat.2da. • Modifying file "upcrystals.2da" found in Override folder... • Setting row label to next HIGHEST value 15. • Adding new row (index 15) to 2DA file upcrystals.2da... • Setting row label to next HIGHEST value 16. • Adding new row (index 16) to 2DA file upcrystals.2da... • Updated 2DA file C:\LucasArts\SWKotOR2\override\upcrystals.2da. • Modifying file "spells.2da" found in Override folder... • Setting row label to next HIGHEST value 283. • Adding new row (index 283) to 2DA file spells.2da... • Found a 2DAMEMORY4 token! Storing value "283" from 2da to memory... • Setting added row column forcehostile to next HIGHEST value 32. • Updated 2DA file C:\LucasArts\SWKotOR2\override\spells.2da. • Modifying GFF format files... • Copying file di_ss3.utp to Override folder... • Modifying GFF file di_ss3.utp... • Found a 2DAMEMORY1 value, substituting with value "375" in memory... • Modified value "375" to field "Appearance" in di_ss3.utp. • Modified 1 fields in "di_ss3.utp"... • Finished updating GFF file "di_ss3.utp"... • Adding file "di_sarc.utp" to archive "712KOR.mod"... • Modifying GFF file di_sarc.utp... • Found a 2DAMEMORY1 value, substituting with value "375" in memory... • Modified value "375" to field "Appearance" in di_sarc.utp. • Modified 1 fields in "di_sarc.utp"... • Override check: No file with name "di_sarc.utp" found in override folder. • Finished updating GFF file "di_sarc.utp" in "Modules\712KOR.mod"... • Saving modified file "di_sarc.utp" in archive "712KOR.mod". • Adding file "di_doorterm1.utp" to archive "712KOR.mod"... • Modifying GFF file di_doorterm1.utp... • Found a 2DAMEMORY2 value, substituting with value "376" in memory... • Modified value "376" to field "Appearance" in di_doorterm1.utp. • Modified 1 fields in "di_doorterm1.utp"... • Override check: No file with name "di_doorterm1.utp" found in override folder. • Finished updating GFF file "di_doorterm1.utp" in "Modules\712KOR.mod"... • Saving modified file "di_doorterm1.utp" in archive "712KOR.mod". • Adding file "di_doorterm2.utp" to archive "713KOR.mod"... • Modifying GFF file di_doorterm2.utp... • Found a 2DAMEMORY2 value, substituting with value "376" in memory... • Modified value "376" to field "Appearance" in di_doorterm2.utp. • Modified 1 fields in "di_doorterm2.utp"... • Override check: No file with name "di_doorterm2.utp" found in override folder. • Finished updating GFF file "di_doorterm2.utp" in "Modules\713KOR.mod"... • Saving modified file "di_doorterm2.utp" in archive "713KOR.mod". • Adding file "di_ndftb.utp" to archive "713KOR.mod"... • Modifying GFF file di_ndftb.utp... • Found a 2DAMEMORY3 value, substituting with value "377" in memory... • Modified value "377" to field "Appearance" in di_ndftb.utp. • Modified 1 fields in "di_ndftb.utp"... • Override check: No file with name "di_ndftb.utp" found in override folder. • Finished updating GFF file "di_ndftb.utp" in "Modules\713KOR.mod"... • Saving modified file "di_ndftb.utp" in archive "713KOR.mod". • Modifying file "global.jrl" found in Override folder... • Modifying GFF file global.jrl... • Added Struct, index 120, at position "Categories" • Added ExoLocString field "Name" at position "Categories\120" • Processing new sub-fields at Categories\120. • Added DWORD field "Priority" at position "Categories\120" • Processing new sub-fields at Categories\120. • Added ExoString field "Comment" at position "Categories\120" • Processing new sub-fields at Categories\120. • Added ExoString field "Tag" at position "Categories\120" • Processing new sub-fields at Categories\120. • Added Int field "PlotIndex" at position "Categories\120" • Processing new sub-fields at Categories\120. • Added Int field "PlanetID" at position "Categories\120" • Processing new sub-fields at Categories\120. • Added List field "EntryList" at position "Categories\120" • Added Struct, index 0, at position "Categories\120\EntryList" • Added DWORD field "ID" at position "Categories\120\EntryList\0" • Processing new sub-fields at Categories\120\EntryList\0. • Added Word field "End" at position "Categories\120\EntryList\0" • Processing new sub-fields at Categories\120\EntryList\0. • Added ExoLocString field "Text" at position "Categories\120\EntryList\0" • Processing new sub-fields at Categories\120\EntryList\0. • Added Float field "XP_Percentage" at position "Categories\120\EntryList\0" • Processing new sub-fields at Categories\120\EntryList\0. • Processing new sub-fields at Categories\120\EntryList. • Added Struct, index 1, at position "Categories\120\EntryList" • Added DWORD field "ID" at position "Categories\120\EntryList\1" • Processing new sub-fields at Categories\120\EntryList\1. • Added Word field "End" at position "Categories\120\EntryList\1" • Processing new sub-fields at Categories\120\EntryList\1. • Added ExoLocString field "Text" at position "Categories\120\EntryList\1" • Processing new sub-fields at Categories\120\EntryList\1. • Added Float field "XP_Percentage" at position "Categories\120\EntryList\1" • Processing new sub-fields at Categories\120\EntryList\1. • Processing new sub-fields at Categories\120\EntryList. • Added Struct, index 2, at position "Categories\120\EntryList" • Added DWORD field "ID" at position "Categories\120\EntryList\2" • Processing new sub-fields at Categories\120\EntryList\2. • Added Word field "End" at position "Categories\120\EntryList\2" • Processing new sub-fields at Categories\120\EntryList\2. • Added ExoLocString field "Text" at position "Categories\120\EntryList\2" • Processing new sub-fields at Categories\120\EntryList\2. • Added Float field "XP_Percentage" at position "Categories\120\EntryList\2" • Processing new sub-fields at Categories\120\EntryList\2. • Processing new sub-fields at Categories\120\EntryList. • Added Struct, index 3, at position "Categories\120\EntryList" • Added DWORD field "ID" at position "Categories\120\EntryList\3" • Processing new sub-fields at Categories\120\EntryList\3. • Added Word field "End" at position "Categories\120\EntryList\3" • Processing new sub-fields at Categories\120\EntryList\3. • Added ExoLocString field "Text" at position "Categories\120\EntryList\3" • Processing new sub-fields at Categories\120\EntryList\3. • Added Float field "XP_Percentage" at position "Categories\120\EntryList\3" • Processing new sub-fields at Categories\120\EntryList\3. • Processing new sub-fields at Categories\120\EntryList. • Processing new sub-fields at Categories\120. • Added new field to GFF file global.jrl... • Modified 1 fields in "global.jrl"... • Finished updating GFF file "global.jrl"... • Modifying and compiling scripts... • Replacing tokens in script di_givescorch.nss... • Compiling modified script di_givescorch.nss... • NWNNSSComp says: Compiling: E:\KOTOR 1 & 2 mods\KOTOR 2 mods\Used Mods\di_andt_2\tslpatchdata\di_givescorch.nss • NWNNSSComp says: Total Execution time = 46 ms • Adding script "di_givescorch.ncs" to archive "712KOR.mod"... • Override check: No file with name "di_givescorch.ncs" found in override folder. • Saving changes to ERF/RIM file 712KOR.mod... • Done. Changes have been applied, but 1 warnings were encountered. Link to comment Share on other sites More sharing options...
xxhellspawnxx Posted November 8, 2012 Author Share Posted November 8, 2012 ive redownloaded it 3 times yes i got same problem with .tga fike however my latest attemp has allowed the jrl to update and the guy on dantoonie is there now but the rodian in the western square still wont take to me even after getting the quest to show in the global.jrl Link to comment Share on other sites More sharing options...
kyrie Posted November 8, 2012 Share Posted November 8, 2012 ive redownloaded it 3 times yes i got same problem with .tga fike however my latest attemp has allowed the jrl to update and the guy on dantoonie is there now but the rodian in the western square still wont take to me even after getting the quest to show in the global.jrl Did you use my changes.ini to install the mod? http://deadlystream.com/forum/files/file/254-fixed-changesini-for-dis-tomb-of-azgath/ Install 2.2 patch? Did you get the memory exception error? If so you need to go into the lips folder and make sure localization.mod is not set to read only. I recall reading something about this at Deadly Stream - at least in regards to InSidious' Tomb of Azgath N'dul mod. Install TSLRCM Delete file global.jrl in Override folder Install MOD Tomb of Azgath N'dul (V 2.0) ( http://knightsoftheoldrepublic.filefront.com/file/Tomb_of_Azgath_NDul;86662x#1480590 ) Install patch 2.2 (NOT patch 2.1) ( http://knightsoftheoldrepublic.filefront.com/file/;113947 ) Download and run Dstoney64's patch ( http://h1.ripway.com/dstoney/TSLRCM_Tomb_patch.rar ) Can anyone confirm if this works with the most current TSLRCM? SH the link for Stoney's patch doesn't work. But yes I can confirm this works with 1.8 my last playthrough I had no issues other than the fact that I messed up my planet order, Korriban should be saved til after returning to Onderon, if not you can't enter the tomb. Link to comment Share on other sites More sharing options...
kyrie Posted November 8, 2012 Share Posted November 8, 2012 please delete this message I edited my post above Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.