Nosaj Posted August 13, 2002 Share Posted August 13, 2002 Does anyone know how to open the ports in a Linksys router to play Jedi? I have the port numbers from lucasarts but I am confused as to where to put them. Link to comment Share on other sites More sharing options...
ShockV1.89 Posted August 13, 2002 Share Posted August 13, 2002 Run: winipcfg Note the last set of numbers in the ip. Type in the following in your Web Address Bar: 192.168.1.1 Then, when the box pops up, type Admin in the passwords box. (it might not be admin. if you changed it, enter the pw) Click on the orange advanced tab on the upper right. Click on the forwarding tab, second from the left. Enter the numbers for the ports you wish to open in the ext. port text boxes. Check the right boxes to the right (I usually do both if I'm not sure). Be sure to click the enable checkbox to the right. Where it says 192.168.1.____, put in the blank spot the numbers you noted when you hit winipcfg. That should work. In WinXP, it's a little harder to find our your IP address (winipcfg), so if someone could clue me in to that, I'd appreciate it. ShockV1.89 Link to comment Share on other sites More sharing options...
teleguy Posted August 13, 2002 Share Posted August 13, 2002 In WinXP, it's a little harder to find our your IP address (winipcfg), so if someone could clue me in to that, I'd appreciate it. You have to run ipconfig in a DOS window. Link to comment Share on other sites More sharing options...
ShockV1.89 Posted August 13, 2002 Share Posted August 13, 2002 Ahhh, thats right. Thanks much. ShockV1.89 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.