R8Sephiroth8P Posted February 28, 2004 Posted February 28, 2004 Im having a problem with clipping. Im trying to cut a piece on a diagnol, but it isnt matching up with the grid lines, cause its already cut as a diagnol. Its hard to explain. Basicly i cut it from the top view first, to make it have a diagnol side. (from the top view). Now i want to cut it so it is goin on a diagnol from the front view, but i cant cause its impossible to view it straight on since its already on a diagnol (top view). Any help on how i can cut it as a diagnol?
WadeV1589 Posted February 28, 2004 Posted February 28, 2004 I'm trying to work out what you just said and failing...maybe cuz I'm tired but wha? How about a diagram or two...or wait a while longer and someone else may read it, get you straight away and post; just I'm struggling too much to comprehend here
Mercenary Posted February 29, 2004 Posted February 29, 2004 Yeah, that's a terrible explanation. Explain it again R8Sephiroth8P and if you can with a screenshot.
{NJO}*Dark Posted February 29, 2004 Posted February 29, 2004 once you have put down the clipping bit, you can then move it into another position if you have your curser over the top of it, that might help you get it in the wright position
Recommended Posts
Archived
This topic is now archived and is closed to further replies.