TimBob12 Posted April 26, 2011 Share Posted April 26, 2011 Lip Syncing (the easy way) This tutorial will show you how to make custom Lip Synching with custom Voice Overs without the need for complicated Mod Prefixes etc. I advise you read through the installation of the CSLU Toolkit below before visiting the site. Tools you will need -Microphone / Voice Actor -Audacity - http://audacity.sourceforge.net/ -Lip Synch Editor - http://www.starwarsknights.com/tools.php#de -CSLU Toolkit - http://www.cslu.ogi.edu/toolkit/register -DLGEditor - http://www.starwarsknights.com/tools.php#de -Notepad Installations Download the Audacity Installer and install Download the ZIP file containing the LipSynchEditor and unzip it. The CSLU Toolkit provides some extra work to install. Visit the above link and enter your email and you will be sent a download link. Download the installer and run it. Select Typical Install and accept the default options. Then go and get a cup of tea while you wait for it to download and extract. Download the ZIP file containing the DLGEditor and unzip it. Notepad comes with windows. Writing Dialogue For writing dialogue here is an excellent tutorial http://www.lucasforums.com/showthread.php?t=180845 Although we will be focussing on two specific things which will be covered later. Make sure you have all of your dialogue written out and then take each individual line and put it in a text file. You can name it whatever you like but I normally use the NPC tag and then a 2 digit number e.g. Hello, How are you today? - commoner01.txt I'm fine thank you - commoner02.txt It just helps distinguish between files. Recording Now plug in your microphone and start up Audacity. Hold the microphone to your mouth and then press the record button and say the first line. Show spoiler (hidden content - requires Javascript to show) You may find it is too quiet and that you need to use the Amplify Effect in the Effects Menu. Show spoiler (hidden content - requires Javascript to show) Then use the drop down menu on the audio channel and select Mono. Show spoiler (hidden content - requires Javascript to show) Then select File, Export and save it as the same name as the corresponding line in the text file for example commoner01.wav would be the sound file for Hello, How are you today? - commoner01.txt Record every line individually and put them in a folder with the .txt files. Make sure that there is no punctuation other than full stops, commas, question marks and exclamation marks as this is all it supports. Lip Synching To acheive custom lip synching you need to use the CSLU Toolkit to create a .phn file that can be read by the LipSynchEditor. To do this open Notepad and type the name of your wav file, followed by a space and the name of your text file. Continue this on the next line for each sound and text file. For example commoner01.wav commoner01.txt commoner02.wav commoner02.txt commoner03.wav commoner03.txt and this can be continued on. Save this as list.txt Next go into the LipSynchEditor folder you extracted earlier, then into Extras and then into Importing. There should be a file named makephn.tcl in there. This will need to be in the same folder as your voice overs, your text files with the words and your list file The next step is slightly different depending on your operating system. Windows XP: Click on Start -> Run and type "cmd" (minus the quotes) and hit enter. Vista/7: Click on the Windows Logo and run a search for "cmd"(minus the quotes) and click on the result that says either cmd or command. (I can't remember which it is as I have XP) You will now need to use some commands to navigate to the directory in which you saved all your files and the makephn.tcl script. The three commands are: dir - lists the contents of the current directory. cd *name of directory* - moves into the *name of directory* cd.. - Moves to the previous directory. For example I made the directory on my desktop and my default start location is C:\Documents and Settings\Tim So I would need to use the command dir cd Desktop cd Voice Overs The dir command is not necessary it just helps to find the names of some folders. You will then need to run the script makephn.tcl that you put in that folder and put list.txt after it. For example: makephn.tcl list.txt would be all you need to type. It will then think about for a bit and then if it is successful it will pop up with a little box that has nothing in. This means it is done and you can close it. If it comes up with an error double check that your sound file is MONO and that there is no excess punctuation in your text files. If you now check your folder there should be a lot of .phn files which are what we need hurrah. Now start up the Lip Synch Editor and click File, Import Phn. Hold down Control and select all of your phn files. This should come up Show spoiler (hidden content - requires Javascript to show) Then click File, Save All and save your .lip files. Now open DLGEditor and click on one of your lines and find the VO_ResRef field. In here type the name of your .lip file without the .lip bit. Then tick the box that says sound exists. Show spoiler (hidden content - requires Javascript to show) You will now need to put the .lip file in the .MOD for the module or in a seperate .MOD for voice overs it doesn't really matter. Then the .WAV needs to go into the StreamWaves Folder for K1 or StreamVoice for K2, NOT INSIDE ANY FOLDERS. HUZZAH you are done. It will work. Hope this works. Any questions, I will endeavour to answer them. If I missed anything or it doesn't make sense then please tell me and i will correct it. Thanks for reading. TB12 Link to comment Share on other sites More sharing options...
Ferc Kast Posted April 26, 2011 Share Posted April 26, 2011 Cool; I'll have to try this out for a future mod project. Link to comment Share on other sites More sharing options...
Qui-Don Jorn Posted May 1, 2011 Share Posted May 1, 2011 Oh excellent., and just when I needed it, too. Link to comment Share on other sites More sharing options...
Fallen Guardian Posted May 1, 2011 Share Posted May 1, 2011 Good tutorial TimBob. Link to comment Share on other sites More sharing options...
TimBob12 Posted May 1, 2011 Author Share Posted May 1, 2011 Thanks, I enjoyed writing it. Link to comment Share on other sites More sharing options...
Viado Onasi Posted May 7, 2011 Share Posted May 7, 2011 Works great for learning how to put in Custom VoiceOvers! Thanks, a ton! Link to comment Share on other sites More sharing options...
Qui-Don Jorn Posted May 28, 2011 Share Posted May 28, 2011 NOOOO!!!!! After making the list and redoing my voiceovers to mono...I cant open .tcl files!!! Hey Timbob got a quick fix for this? without having to buy some crap off the internet? Link to comment Share on other sites More sharing options...
TimBob12 Posted May 28, 2011 Author Share Posted May 28, 2011 What do you mean you can't open them? What are you trying to open them with. You have to import them into the LipSynchEditor. Link to comment Share on other sites More sharing options...
Qui-Don Jorn Posted May 29, 2011 Share Posted May 29, 2011 right, ..but you can't import .phn files you don't have. i got to the point where I went to.. 1.open run 2.cd desktop 3. cd 303iacen (my folder with the makephn.tcl, list.txt, wav's and txt files) 4. makephn.tcl list.txt 5 BAM! nothing...can't open or use .tcl,...windows asks for file association. so what do I do? Link to comment Share on other sites More sharing options...
TimBob12 Posted May 30, 2011 Author Share Posted May 30, 2011 Ah, my bad. Should be quite a simple fix. Find the makephn.tcl file and right click on it. Click on Open With and then click choose program. Then click browse and broswe to the directory you installed the CSLU Toolkit to. Then open the TCL80 folder then the Bin Folder and select wish80.exe. Then try the command again. Should fix all your problems Link to comment Share on other sites More sharing options...
Qui-Don Jorn Posted May 30, 2011 Share Posted May 30, 2011 Oh, ok..good good. Thanks! HA! Yes that was it..!!! Yay, now I get to make over 100 lipfiles. Wow, cool. This is easier than I thought it was going to be....sweet. Link to comment Share on other sites More sharing options...
TimBob12 Posted June 3, 2011 Author Share Posted June 3, 2011 No Problem, I need to update the post in the tutorial section with that as well. Link to comment Share on other sites More sharing options...
Fallen Guardian Posted June 25, 2011 Share Posted June 25, 2011 I've tried to download the CSLU toolkit but no matter how many email adresses I try (all of them are real) It says the email has failed. Can you email me whatever is contained in that email? Link to comment Share on other sites More sharing options...
TimBob12 Posted June 25, 2011 Author Share Posted June 25, 2011 First off try this http://10minutemail.com/10MinuteMail/index.html If it doesn't work then I'll email it over but I am short on time at the minute. Link to comment Share on other sites More sharing options...
Fallen Guardian Posted June 25, 2011 Share Posted June 25, 2011 It still says email has failed. I'll PM you my email. Link to comment Share on other sites More sharing options...
Dak Drexl Posted October 22, 2011 Share Posted October 22, 2011 Can anyone confirm or deny that this works with mp3 files? I get a weird error when I run the makephn command and I'm led to believe that's the issue. I hope I'm wrong haha... Link to comment Share on other sites More sharing options...
UltimateHK47 Posted November 20, 2011 Share Posted November 20, 2011 CAn you use goldwave for this? Link to comment Share on other sites More sharing options...
TimBob12 Posted November 21, 2011 Author Share Posted November 21, 2011 No it doesn't work with MP3s and yes you can use any audio recording software that can export to .wav Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.