Inyri Posted April 27, 2014 Author Posted April 27, 2014 I'm already working on an updated version of the Carnifex I already made. Adding a silencer to it wouldn't be much of an extra time expenditure. It's the updated texture that would take the longest.
Sith Holocron Posted May 6, 2014 Posted May 6, 2014 As the Star Wars universe uses Aurebesh instead of any standard Earth alphabet, had you any plans to create alternate skins for your Mass Effect weapons to better fit into the KOTOR Universe? If I'm not mistaken, you've done this with at least one of your guns before.
Inyri Posted May 6, 2014 Author Posted May 6, 2014 I suppose I could. Writing is minimal on them anyway.
Inyri Posted June 6, 2014 Author Posted June 6, 2014 Download me. Sith Holocron, will try and remember to look into the aurebesh this weekend.
Sith Holocron Posted June 6, 2014 Posted June 6, 2014 Thanks. Take your time Inyri, as I'm not near my computer this week.
Phildevil Posted June 6, 2014 Posted June 6, 2014 Heh, I love your new banner, Mel! I think I'm going to get one just like that
Sith Holocron Posted June 12, 2014 Posted June 12, 2014 This is probably a dumb question but is the N7 Valiant weapon usable in TSL as well?
GeorgNihilus Posted June 12, 2014 Posted June 12, 2014 Inyri said: Download me. Sith Holocron, will try and remember to look into the aurebesh this weekend. oh my my ... Inyri is back ... looks outstanding as usual. And I do agree about replacing the 2nd blaster carbine model ... good choice. Carth/Canderous will be thanking you more than me ... thx a lot
GeorgNihilus Posted June 12, 2014 Posted June 12, 2014 well ... considering I wasn't about to replace my Sith Assault Gun replaced model ... I replaced the 4th blaster carbine model instead of the 2nd. Worked like a charm ... except that that's Jurgan Kalta's blaster carbine ... and that's an extremely rare piece of weaponry in Kotor. Not even this "guy" from Yavin 4 space station have it in its inventory on a single interaction ... that said; to cheat Jurgan Kalta's carbine to inventory call cheat console and type giveitem g_w_blstrcrbn004 and ENTER. That's it ... oh, and I also replaced the 7th blaster carbine model ... that however (g_w_blstrcarbn007) is NOT being added to inventory by cheating for some reason. That's another version of Jurgan Kalta's carbine, never understood or took a serious 'look' on HOW these different variants of the same weapon work in-game bye
Fair Strides 2 Posted June 12, 2014 Posted June 12, 2014 GeorgNihilus said: well ... considering I wasn't about to replace my Sith Assault Gun replaced model ... I replaced the 4th blaster carbine model instead of the 2nd. Worked like a charm ... except that that's Jurgan Kalta's blaster carbine ... and that's an extremely rare piece of weaponry in Kotor. Not even this "guy" from Yavin 4 space station have it in its inventory on a single interaction ... that said; to cheat Jurgan Kalta's carbine to inventory call cheat console and type giveitem g_w_blstrcrbn004 and ENTER. That's it ... oh, and I also replaced the 7th blaster carbine model ... that however (g_w_blstrcarbn007) is NOT being added to inventory by cheating for some reason. That's another version of Jurgan Kalta's carbine, never understood or took a serious 'look' on HOW these different variants of the same weapon work in-game bye The different variants are because of the item upgrades placed inside, at least going by the other weapons, like Yusani's Ritual Brand...
GeorgNihilus Posted June 14, 2014 Posted June 14, 2014 Fair Strides 2 said: The different variants are because of the item upgrades placed inside, at least going by the other weapons, like Yusani's Ritual Brand ... thx a lot. Yes, that should explain why cheating the 007 'version' doesn't work while 004 is properly added to inventory
Sith Holocron Posted September 29, 2014 Posted September 29, 2014 First question is for anyone that can answer it: Might anyone know what the sound file for the gun that the M-8 Assault Rifle is a replacement for? (I have an idea for a sound file replacement for own personal usage but I'd need to know the name of the original sound file first.) Second question is for Inyri Forge and there's no rush on the answer: might you have idea how close to release you might be for the Mass Effect Revenant and Valiant models you've created?
GeorgNihilus Posted October 7, 2014 Posted October 7, 2014 Sith Holocron said: First question is for anyone that can answer it: Might anyone know what the sound file for the gun that the M-8 Assault Rifle is a replacement for? (I have an idea for a sound file replacement for own personal usage but I'd need to know the name of the original sound file first.) Second question is for Inyri Forge and there's no rush on the answer: might you have idea how close to release you might be for the Mass Effect Revenant and Valiant models you've created? looks like Inyri is gone ... for a short while, hopefully??
Inyri Posted October 16, 2014 Author Posted October 16, 2014 I may or may not be. Revenant is a loss and I don't feel like remodeling it. As far as the Valiant goes, I released that in June, I just forgot to put it on my own website (lol). There's a link to it in post # 129.
GeorgNihilus Posted October 16, 2014 Posted October 16, 2014 Inyri said: I may or may not be. Revenant is a loss and I don't feel like remodeling it. As far as the Valiant goes, I released that in June, I just forgot to put it on my own website (lol). There's a link to it in post # 129. oh well ... no N7 Hurricane or Acolyte then?? u didn't start with those did u?? good to hear from ya again P.D. Carth/Canderous r givin' heck of a use to that N7 Valiant sniper u know
Inyri Posted October 16, 2014 Author Posted October 16, 2014 I'm not really sure what will be next, if anything. My interest in modding has been pretty minimal for a couple years now. Edit: Couple things. One, this should be up on DeadlyStream soon(ish). Two, after following this GamerGate fiasco for a couple weeks now I am dedicated to making a mod or two more just to spite all those *******s. If anybody has any particular requests from Mass Effect that they want to see most lay them on me, otherwise I'll probably just pick something I want to see.
Inyri Posted October 22, 2014 Author Posted October 22, 2014 Decided I needed to get back into things a little slowly, so I'm going to make something stupidly simple: Kai Leng's/Phantom's sword. Shooting for the model/texture done by tomorrow. We know how that usually works out though.
GeorgNihilus Posted October 22, 2014 Posted October 22, 2014 Inyri said: Decided I needed to get back into things a little slowly, so I'm going to make something stupidly simple: Kai Leng's/Phantom's sword. Shooting for the model/texture done by tomorrow. We know how that usually works out though. stupidly simple?? for you that is ... Kai Leng's? never heard of it. It has "some" resemblance to a simple katana ... doesn't it? P.D. almost forgot ... PLEASE as new weapon when it's done ... not just a replacer. I have EVERYTHING replaced u know ... really
Inyri Posted October 22, 2014 Author Posted October 22, 2014 Well... yeah. Simple for me. Swords are my thing. All the phantoms use this sword too. Making some progress. This isn't even CLOSE to done - mostly I have just focused on the hilt, and only one side of it at that. Was hoping to finish soon but I'm much too easily distracted. This is what the actual texture for the front of the hilt looks like. Only 8 layers! I'm getting more efficient! All hand painted. No photosourcing beyond looking at the reference. Also I realize that gold looked a lot golder on my other monitor. It'll get tweaked as I go. This is the ref I was working from (click for a GIGANTIC view of it): Last note for those that understand what this means: this model is 100% fully self-lit.
DeathScepter Posted October 22, 2014 Posted October 22, 2014 it would be cool if it was possible for you to be able to make a Cerberus Armor similar to Kai Leng's Cerberus Armor to match the swords.
GeorgNihilus Posted October 22, 2014 Posted October 22, 2014 Inyri said: Well... yeah. Simple for me. Swords are my thing. All the phantoms use this sword too. Making some progress. This isn't even CLOSE to done - mostly I have just focused on the hilt, and only one side of it at that. Was hoping to finish soon but I'm much too easily distracted. This is what the actual texture for the front of the hilt looks like. Only 8 layers! I'm getting more efficient! All hand painted. No photosourcing beyond looking at the reference. Also I realize that gold looked a lot golder on my other monitor. It'll get tweaked as I go. This is the ref I was working from (click for a GIGANTIC view of it): Last note for those that understand what this means: this model is 100% fully self-lit. 100% fully self-lit? that means it will shine in the dark like inside caves??
Inyri Posted October 22, 2014 Author Posted October 22, 2014 lol no it just means none of the shading in the image is from the renderer and it's all from the texture.
GeorgNihilus Posted October 22, 2014 Posted October 22, 2014 Inyri said: lol no it just means none of the shading in the image is from the renderer and it's all from the texture. haha ha ha (laughing of myself) ... P.D. well maybe I'm not THAT newbie ...
Xarwarz Posted November 15, 2014 Posted November 15, 2014 Self illuminated swords looking good keep up the great modding...remember if burn-out happens take month or two off....thats how i make it through all this texturing i do.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.